SCC Centrifugal Type Bucket Elevator – recommended for handling fine, free-flowing materials which can be dug from the elevator boot. Small lumps, as listed for standard elevators, can be handled –providing buckets of proper size are used.The feed point is lower, loading is simpler and fewer buckets are required than for the Continuous Type Bucket Elevator. Buckets on chain or belt travel at speeds high enough to discharge materials by centrifugal force as they pass around the head pulley or sprocket.

SCC Continuous Type Elevator – recommended for handling sluggish, aerated and friable material and material having a large percentage of lumps. Continuously spaced buckets travel at slower speeds than the centrifugal type. The buckets are designed so that the fronts and extended sides form a chute as they pass around the head pulley or sprocket. Gravity causes the material to flow gently out of the buckets and down the chute, formed by the preceding buckets, into the discharge spout.

SCC Double Trunk High Capacity Bucket Elevators – The SCC Bucket elevator has been designed and engineered to provide efficient high capacities for handling various grains, feeds, mill stock and similar free flowing granular materials. It is manufactured in many different sizes to suit individual requirements. It has double trunk legging construction with connecting angles provided on each 10 foot flange section. Vertical angle supports are included on taller units.